Materials
ABS
Acrylonitrile Butadiene Styrene
- Impact resistance and toughness
- UV, heat and abrasion resistance
- Shiny, smooth surface when printed with heated chamber
ABS Pro
Acrylonitrile Butadiene Styrene
- High impact strength
- Excellent adhesion
- Minimal warping
- High heat resistance
ABS v0
Acrylonitrile Butadiene Styrene
- Impact resistance and toughness
- Heat resistant and flame retardant
- Shiny, smooth surface when printed with heated chamber
ASA
Acrylonitrile Styrene Acrylate
- UV resistance, suitable for outdoor use
- Good mechanical strength
BVOH
Butenediol Vinyl Alcohol
- Water soluble support material
- Compatible with ABS, ASA, PA, PC-ABS, PET-g and others
- High solubility
PA 6/66
Polyamide 6/66
- Strong, shatterproof parts
- High abrasive resistance
- Low friction coefficient
PA 6/66/12
Polyamide 6/66/12
- Good adhesion to the printing surface
- With the possibility to use a layer fan for even finer details or printing long bridges
- Low warping, allowing for better printing of fine details and overhangs
- Strong as nylon, but with greater flexibilit
PA 12
Polyamide 12
- Good elongation at break, high tensile and impact strength
- High fatigue endurance and low friction coefficient
- Chemical, UV and heat resistance
PAHT CF
Polyamide 6/66 – Carbon Fiber
- Superior mechanical properties and dimensional stability
- High heat and chemical resistance
- Properties comparable to injection molding
PC-ABS
Polycarbonate - Acrylonitrile Butadiene Styrene
- Heat resistant
- High impact strength
- Good resolution and surface finish
PC-ABS v0
Polycarbonate - Acrylonitrile Butadiene Styrene
- Heat resistant and flame retardant
- High impact strength
- Good resolution and surface finish
PEEK
Polyether Ether Ketone
- Inherently flame resistant and self-extinguishing
- Long-term hydrolytic stability even above 250°C
- Outstanding resistance to a broad range of chemicals
- Low smoke and toxic gas emissions
PEEK CF
Polyether Ether Ketone – Carbon Fiber
- Excellent mechanical and chemical resistance at high heat
- Resistant to thermal degradation, organic and aqueous environments
- Good polymer alternative to aluminum and steel
PEKK
Polyether Ketone Ketone
- High thermal properties
- Low smoke generation
- Outstanding mechanical, thermal, and chemical resistances
PPSU
Polyphenyl Sulfone
- High Environmental Stress Crack Resistance
- Sterilization capable, including EtO gas, radiation, steam autoclaving, plasma, dry heat and cold sterilization
- Exceptional strength and modulus, even at elevated temperatures
- Outstanding impact resistance
PVA
Polyvinyl Alcohol
- Water soluble support material
- Compatible with PLA
TPU 98
Thermoplastic Polyurethane
- Semiflexible
- High impact and abrasion resistance
- Strong, shatter-resistant parts
ULTEM 1010
Polyetherimide
- Heat and flame resistance
- Broad chemical resistance
- Dimensional stability
- High dielectric strength
ULTEM 9085
Polyetherimide
- Heat and flame resistance
- Broad chemical resistance
- Dimensional stability
- High dielectric strength